Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Pembroke Pines?
Gate installation in Pembroke Pines typically costs $2,400 to $6,800 for a standard residential swing gate, with driveway gates and automated systems running $5,500 to $12,000 or more depending on span, material and operator. A driveway gate with an opener on a single-family lot in Pembroke Pines usually lands around $6,200. Every job is priced per job by a written estimate, and that estimate is free.
Our technicians have up to 9 years of experience, and every service call we take is a gate call. We work on gates, only gates. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 748-7198 to book a free on-site estimate.
What’s Included in a Gate Installation Price
A gate installation price in Pembroke Pines covers the gate itself, the posts and hardware, and the labor to set and hang it. When the gate is automated, it also covers the operator, the safety devices and the electrical run to power the system.
A typical quoted installation includes:
- The gate panel or panels, sized to the opening
- Posts, hinges, latches, and the stops and brackets that go with them
- Digging and setting posts to proper footing depth
- Hanging and aligning the gate so it swings or slides cleanly
- For automated gates: the operator, safety sensors, and the wiring from the power source
- Testing the whole assembly with the party who will use it every day
What’s not usually included: landscaping restoration around the gate line, a new concrete pad or driveway apron, or a new electrical circuit panel. Those are separate trades. We’ll tell you upfront if a job needs one of them so you’re not surprised partway through. From a broken hinge to a failed control board, one call covers the whole arc of a gate’s life. At the start of that arc is installation, and that’s a service we run in-house.
Gate Installation Cost Breakdown (2026)
Here’s how the pieces usually price out for a Pembroke Pines installation in 2026. These are typical ranges, not quotes. The written estimate you get after we look at your property sets the final price.
| Line item | Typical cost range |
|---|---|
| Basic single swing gate, manual (aluminum or steel frame) | $1,800 – $3,500 |
| Double swing driveway gate, manual | $3,200 – $6,500 |
| Sliding gate, manual | $3,500 – $7,000 |
| Residential swing gate operator (single gate) | $1,400 – $2,800 |
| Residential sliding gate operator | $1,600 – $3,200 |
| Sliding gate track and rollers | $350 – $900 |
| Safety sensors and photo-eye set | $250 – $650 |
| Keypad or entry control | $300 – $800 |
| Wiring and conduit run from power source | $400 – $1,400 |
| Full driveway gate installation, automated (combined) | $5,500 – $12,000+ |
The biggest single variable is whether you go manual or automated. Automation can roughly double the total once the operator, safety devices and wiring are in the mix. Commercial-grade systems – the kind an HOA or a managed property runs – price higher than a single-family drive gate because the gates are larger, the operators are heavier-duty, and the access-control hardware runs through DoorKing, FAAC or BFT equipment rather than a residential platform.
Brand choice moves the number as well. A Ghost Controls or Mighty Mule operator for a residential swing gate sits toward the lower end. A LiftMaster or Linear system for a busier driveway lands mid-range. FAAC, BFT, Elite and DoorKing commercial platforms sit at the top for larger gates and access-controlled entries. We service all nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the operator recommendation comes from what your gate actually needs, not what we happen to stock. We don’t stock anything on a truck. We size the system to the opening, the use, and the power available at the property.
What Affects Gate Installation Pricing in Pembroke Pines
Pembroke Pines is flat and built-up, and that shape changes how a gate job prices compared to other parts of South Florida. Here are the factors that move the number most:
- Gate width and weight. A single walk-gate at 4 feet prices far below a 16-foot double driveway gate. Heavier panels need sturdier posts and heavier hinges, and that shows up in labor and materials.
- Manual versus automated. The operator and its safety devices are the single biggest add-on. If you have any thought of automating later, tell us now – the posts, the track and the wiring run are far cheaper to plan for at installation than to retrofit.
- Type of gate. Swing gates are usually the cheaper install on a residential lot. Sliding gates need a track, rollers and a clear run of level ground along the fence line – which on a tight Pembroke Pines lot with a paver driveway and mature royal palms can mean moving landscaping or shortening the fence run to fit.
- Post footings. Posts go to proper footing depth for the gate’s size and weight. A gate that grounds poorly is a gate that sags within a season – one of the most common install problems and one of the most expensive to fix after the fact.
- Power source distance. If the gate site is close to the panel, wiring is short and cheap. If the gate sits at the far end of a deep lot, the conduit run is longer. On a typical Pembroke Pines lot, the gate position relative to the house is often the deciding factor in the wiring line item.
- Access and property layout. Tight side yards, neighboring fence lines and municipal rules on where a gate can sit near a corner all affect install time. Pembroke Pines lots vary from tight interior parcels to larger estate-style driveways out toward the western end of the city, and the differences are real once we’re on-site.
- Brand and duty cycle. A residential platform on a single-family gate is priced and sized differently than a commercial operator sized for dozens of daily cycles at an HOA entrance. Getting this wrong is expensive; a residential operator on an HOA gate burns out early.
- Entry control. A basic keypad is a modest line item. Full access control with telephone entry, card readers and multiple users is a bigger project. We handle both, and the price reflects which one you pick.
Swing Gate vs. Sliding Gate: Which Costs Less to Install?
A swing gate usually costs less to install than a sliding gate. The savings come from skipping the track, the rollers and the clear, level run a sliding gate needs along the fence line.
Swing gates are the more common residential choice in Pembroke Pines for exactly that reason. They work well on a standard driveway and don’t need real estate to slide into. Sliding gates win when the driveway is deep, when a swing would interfere with vehicles or pedestrians, or when the property has a long fence line that can accommodate the slide path. On a tight lot those conditions aren’t always met without moving landscaping, which adds cost to the install.
Both types work with automation. A swing operator on a single gate and a sliding operator on a track both price within the same broad range. The deciding factor is usually the property layout, not the operator.
How Long Does Gate Installation Take?
A basic manual single swing gate on a Pembroke Pines property is typically installed in a single day. Automated double driveway gates and sliding gates with wiring can take two to three days depending on power runs and site prep.
The schedule breaks down into a few stages:
- On-site estimate. We measure the opening, note the power source, check the fence line and confirm whether any permits or HOA approvals are needed. Free.
- Post setting and site prep. The posts go in to proper footing depth and cure before the gate hangs. Depending on conditions, this can wrap into the next visit.
- Hanging and alignment. The gate goes up and gets dialed in so latches, hinges and stops line up cleanly.
- Automation and testing. If the gate is automated, the operator, safety sensors and wiring are installed and tested with the people who’ll use the gate daily.
If the gate needs a permit or HOA sign-off, that adds lead time up front but doesn’t change the install itself. Ask your city’s building department and your association before the install date.
Do You Need a Permit to Install a Gate in Pembroke Pines?
Most cities require a permit for a new automated gate, and some require one for any new fence-and-gate line near a property boundary. Confirm the rules with the City of Pembroke Pines building department before the install starts. HOA-governed properties in Pembroke Pines usually need association approval for gate style, height and placement as well.
We can’t pull permits for you – that’s between you and the city – but we can tell you what’s typically reviewed on a gate install so you know what to gather. If your property is part of an HOA, the architectural review board usually wants the gate plan, material and finish before the work begins. Getting that in hand shortens the process.
How to Save on Gate Installation in Pembroke Pines
There isn’t a secret discount on gate installations. The savings come from planning decisions made before the install, not after.
- Plan for automation up front, even if you’re not automating yet. Running the wiring and sizing the posts for an automated gate at install time is far cheaper than retrofitting later. You don’t have to buy the operator; you just have to leave room for it.
- Combine the gate with fencing repairs you already need. If a section of fence line is on its last legs, fixing it during the gate install saves the cost of two separate visits.
- Know your brand tier. A residential platform on a residential gate is cheaper than a commercial platform on a residential gate. We’ll recommend the platform that matches your use, not the one with the highest ticket price.
- Get the estimate before you commit. A free on-site estimate is the only way to know whether the range you’ve read here lands near the top or bottom for your property. Call (877) 748-7198 to book one.
- Have the power source sorted. If the electrical run to the gate site needs work, coordinate it before install day. Bringing in a separate electrician mid-install adds time and money.
Why a Gate-Only Specialist Keeps the Installation Price Honest
We work on gates – only gates. That’s not a marketing line; it’s why the install price is predictable. A generalist contractor quotes a gate installation without the diagnostic depth that comes from doing only gate work. We’ve seen what a gate fails at because we spend every working day on them. Our installation decisions are built on that.
Whether your property runs a LiftMaster or a FAAC, we already know the system. We service nine brands across residential and commercial applications, which means we’re not guessing at the operator or the access-control hardware when the estimate goes out. And because we handle repair, electric gate repair and installation under one roof, the transition from new system to long-term upkeep doesn’t involve hunting for a different contractor. When you need service on the Tidewater Gate Repair side, we’re already there. For a wider view of how we work across the city, see our Pembroke Pines page.
Same-Day Help and What Happens When You Call
Gate installation is usually scheduled, not same-day, but same-day visits are available for quick questions, site checks or urgent problems with an existing gate that needs replacing. Call (877) 748-7198. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
The first step is always a free on-site estimate. We look at the opening, the fence line, the power source and the traffic the gate will see. Then we send a written estimate with the price for the job. That written number is the price. No surprises, no add-ons after the fact.
FAQs – Gate Installation Cost in Pembroke Pines
How much does a driveway gate cost to install in Pembroke Pines?
A driveway gate in Pembroke Pines typically costs $3,200 to $6,500 for a manual double swing gate, and $5,500 to $12,000 or more automated. The written estimate after a free on-site visit sets the final price. Call (877) 748-7198 to book one – estimates are free.
Is it cheaper to install a swing gate or a sliding gate?
A swing gate is usually cheaper to install, by roughly $1,500 to $3,000 in most Pembroke Pines residential settings, because it skips the track, rollers and level slide path a sliding gate needs. On a tight lot, a sliding gate can cost more because the fence line has to change to fit. Call (877) 748-7198 for a quote based on your property.
How much does a gate operator add to the installation?
A residential gate operator typically adds $1,400 to $3,200 in Pembroke Pines, depending on the platform and whether wiring is already run. Safety sensors and entry controls add more on top of that. The written estimate sets the final number. Call (877) 748-7198 to talk through your gate.
Can you install a gate on a property without an existing power source at the gate?
Yes, but the wiring run adds cost and time. In most Pembroke Pines properties, bringing power to the gate site runs $400 to $1,400 depending on the distance from the panel and how the run is routed. We plan for this during the free on-site estimate. Call (877) 748-7198 to schedule.
How long will the installation take, and can you come today?
A basic manual single gate is usually installed in one day; automated double and sliding gates take two to three days. Installation is scheduled, not same-day, but same-day visits are available for site checks and urgent issues. Call (877) 748-7198. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What brands of gate and operator can you install?
We service and install nine gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – across residential and commercial applications. Whether your project calls for a residential Ghost Controls entry or a commercial FAAC system at an HOA entrance, we already know the platform. Call (877) 748-7198 to discuss the right fit for your gate.
Key Takeaways
- Gate installation in Pembroke Pines runs $2,400 to $6,800 for most residential swing gates; a full automated driveway gate is $5,500 to $12,000+.
- Automation, gate type, brand tier and the distance to the power source are the biggest cost drivers.
- Swing gates are typically cheaper to install than sliding gates on a residential lot.
- Most cities require a permit for automated gates; check with the City of Pembroke Pines and your HOA before the install.
- Free on-site estimates; the written estimate sets the final price.
Ready for a Written Estimate?
Your gate is your property’s first line of security, and installation is the right moment to get the details correct. From a broken hinge to a failed control board – one call covers it. So does a new gate, start to finish. Call (877) 748-7198 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Every service call is a gate call, and every estimate is free.
Pricing reflects the Pembroke Pines market as of 2026. Tidewater Gate Repair offers free estimates – call (877) 748-7198.
What Our Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Keisha Ellison"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Ebony Dawson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Keisha Ingram