Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Pembroke Pines?
Gate repair in Pembroke Pines typically costs $185 to $450 for common fixes like a sagging hinge, a misaligned latch, or a worn roller, while electric gate repair involving the operator, control board, or safety sensors usually runs $275 to $850. Larger jobs – a bent slide gate track, a failed actuator, or a full panel replacement – can reach $900 to $1,800. Those ranges assume parts are still available and the gate frame is sound; a written estimate after we see the gate sets the final price.
We work on gates, only gates. That narrow focus is why we can usually tell you more in one visit than a general contractor who splits time across fences, garages, and a dozen other trades. Our technicians have up to 9 years of experience, and every service call is a gate call. If your gate won’t open, won’t close, won’t latch, or groans through a cycle, we diagnose it and quote the repair before we touch anything.
Key Takeaways
- Most manual gate repairs in Pembroke Pines fall between $185 and $450.
- Electric or automated gate repairs typically run $275 to $850, depending on the brand and whether the operator or controller failed.
- Structural repairs to slide gates and heavy swing panels cost more because of the weight involved.
- The estimate is free, and the written estimate is the price you pay.
- We service nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we likely already know your system.
Gate Repair Cost Breakdown (2026)
Below are the estimated ranges we see across Pembroke Pines for the work that actually comes up on residential and HOA properties. These are typical figures for the 2026 market. They are not precise quotes; the written estimate is what sets your final cost.
| Repair Type | Typical Estimated Range |
|---|---|
| Hinge replacement (per hinge) | $185 – $320 |
| Latch or strike realignment | $195 – $340 |
| Roller and track adjustment (slide gate) | $220 – $400 |
| Panel or picket repair | $240 – $520 |
| Post reinforcement or re-set | $350 – $750 |
| Gate operator / motor replacement | $500 – $1,200 |
| Control board replacement | $325 – $650 |
| Safety sensor or photo-eye repair | $275 – $480 |
| Keypad, remote, or access control repair | $195 – $425 |
| Wiring repair between operator and control | $300 – $700 |
| Battery backup system service | $350 – $650 |
| Full slide-gate track replacement | $900 – $1,800 |
What pushes a job toward the top of a range? Three things, mostly. Parts availability for your brand, the weight class of the gate, and whether the failure is mechanical or electrical. A loose hinge on a light residential swing gate is a quick visit. A commercial-grade operator on a heavy HOA slide gate that has stopped reversing is a different job entirely, and we price it accordingly.
What brings it down? An accurate description on the phone. If you can tell us the brand of the opener and whether the gate is manual or automated, we’ll have a better idea of what to expect and can quote tighter ranges up front. If you’re not sure, that’s fine – we’ll figure it out on site. For a broader look at the work we do, see our gate repair page.
What Affects Gate Repair Pricing in Pembroke Pines
- Gate type and weight. A light residential swing gate and a 12-foot slide gate that serves a whole HOA entrance are two different repair categories. Heavier panels need more than one technician on site and heavier-duty hardware, and both raise the cost.
- Manual vs. automated. Once an operator is involved – motor, control board, sensors, wiring – diagnosis takes longer and parts are more expensive. Electric gate repair is the category where costs climb fastest, and it’s exactly what we’re built for.
- Brand and part availability. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether your part is common or harder to source affects both timeline and price. Some older operators need a compatible replacement rather than a direct swap, which is worth knowing before the visit.
- Seasonal use and growth. In this climate, gates cycle year-round and vegetation grows constantly. Ground movement after heavy summer rain, roots pushing under a slide gate track, and debris in the roller path are all common triggers for the sagging, dragging, and sticking we see across Pembroke Pines. A gate that drags on the track wears out its hardware much faster.
- Hurricane prep and aftermath. Properties across Pembroke Pines take gate damage from storm wind and flying debris. A bent picket or a panel that shifted is different from a full panel replacement, and the price gap reflects it. If a storm has knocked your gate out of alignment, mention it when you call so we can plan the visit accordingly.
- Access-control integration. Gates on keypads, remotes, intercoms, or vehicle transponders take longer to test and troubleshoot because so much of the failure is in the electronics, not the gate itself. Commercial and HOA systems using DoorKing or FAAC access control sit at the higher end for that reason.
How to Save on Gate Repair
The single biggest factor in what you pay is how early you call. A gate that drags on its track wears out the rollers, then the hinges, then the operator as it works harder to move. Fixing the drag early is cheaper than fixing the drag plus everything it damaged down the line. If your gate is making noise, sticking halfway, or needing a push, that’s the moment to book a visit.
- Describe the problem precisely. “It won’t close all the way” and “it won’t open at all” point to very different causes and very different price ranges. The more you can tell us on the phone, the tighter the estimate.
- Know your brand. If you can find the label on the operator – LiftMaster, Mighty Mule, Ghost Controls, Linear, and so on – say so when you call. It helps us bring the right parts knowledge to the visit.
- Clear the gate path. Trim back vegetation and clear debris from the track before we arrive. It doesn’t change the repair cost, but it lets us diagnose the actual problem instead of a jam caused by a branch.
- Fix small things before they become big ones. A misaligned latch is a quick job. Once that same misalignment has bent hinges and stressed the operator, the bill grows.
- Get a free estimate. Call Tidewater Gate Repair at (877) 748-7198 and we’ll walk you through the likely range before you commit to anything.
One more piece of advice: if you’re weighing repair against replacement, the rule of thumb is straightforward. A single failed component – a hinge, a latch, a control board, a sensor – is almost always worth repairing. A gate frame that has rotted, or a post that has shifted from its footing, is worth pricing against a new installation. We handle both, so you’re not handed off to a third party if the answer turns out to be a replacement.
FAQs – Gate Repair Cost
How much does the cheapest gate repair in Pembroke Pines cost?
The lowest-cost gate repairs we see in Pembroke Pines start around $185, usually for a single hinge replacement or a minor latch adjustment. Anything below that range is uncommon because the visit itself, even for a small fix, involves travel and diagnosis time. Call (877) 748-7198 for an exact quote on your specific gate – estimates are free.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper than replacement for a single failed component – a hinge, latch, roller, sensor, or control board. Most of those repairs land between $185 and $650, while a full gate replacement costs significantly more. Replacement only makes financial sense when the frame is compromised, a post has shifted from its footing, or the operator is obsolete and no compatible parts exist. Call (877) 748-7198 and we’ll tell you honestly which path fits your gate.
How much does electric gate repair cost in Pembroke Pines?
Electric gate repair in Pembroke Pines typically runs $275 to $850, depending on whether the issue is in the operator, the control board, the safety sensors, or the wiring. A full operator replacement lands between $500 and $1,200. Electric gates fail in a lot of quiet ways – a sensor that stops registering, a board that forgets its limits, a motor that strains on the close cycle – and each one prices differently. Call (877) 748-7198 for a free estimate.
Do you charge for the estimate?
No. The estimate is free. We look at the gate, diagnose the problem, and give you a written estimate before any work begins, and that written estimate sets the final price. There’s no separate charge to come out and look. Call (877) 748-7198 to book a visit.
Can you come the same day?
Same-day service is often available in Pembroke Pines, and the fastest way to find out is to call (877) 748-7198. We answer 24/7 and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Same-day visits are priced the same as any other visit – the written estimate is what sets the cost.
Does my gate’s brand affect what I pay?
Yes, sometimes – mainly through parts availability rather than labor. We service nine brands across residential and commercial systems, from Ghost Controls and Mighty Mule on the residential side to FAAC, BFT, Elite, and DoorKing on the commercial and HOA side. Whether your particular part is common or harder to source can shift the estimate up or down. Call (877) 748-7198 and have your brand name ready if you can find it – it speeds things up.
Why Choose a Gate-Only Specialist
Gate repair is its own trade. It looks like fencing or garage door work from the outside, but the diagnosis is different: you’re reading mechanical wear on a moving panel, electrical behavior in an operator, and access-control logic all at once. A generalist contractor often has to learn your system on your property. We don’t. Our technicians have up to 9 years of experience, and every call we take is a gate call.
Whether your property runs a LiftMaster or a FAAC, we already know the system. That’s true for a single-family home in Pembroke Pines with a Mighty Mule swing gate and for a managed property with a DoorKing access-control setup at the entrance. From a broken hinge to a failed control board, one call covers it. No hand-off, no sub-contractor for the electrical side, no separate crew for a new install if that turns out to be the answer.
We also want to flag a safety point. Gates – especially automated ones – have crush points, and a slide gate that has come off its track can fall. If your gate is hanging, leaning, or moving unpredictably, keep people and vehicles clear of it and let a trained technician handle it. Do not try to force a stuck electric gate open by hand; on many operators, that causes more damage than the original fault. We treat gate repair as the safety-critical work it is, because your gate is your property’s first line of security.
What Happens When You Call
When you call (877) 748-7198, we start with a short set of questions: manual or automated, brand if known, and what the gate is actually doing. From there we book a visit, and on site we diagnose, explain what we found, and hand you a written estimate before any work starts. If it’s a straightforward repair, we can often handle it in the same visit. If parts need to be sourced, we’ll tell you the timeline and price up front.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call that comes in outside dispatch hours is booked into the next opening.
If your gate is stuck, sagging, or refusing to respond to the remote, don’t wait for it to get worse. The earlier we see it, the simpler – and cheaper – the repair tends to be. Pricing is per job, set by a free written estimate, and we’ll give you a straight answer about what your gate needs.
Call Tidewater Gate Repair at (877) 748-7198 for a free estimate on gate repair in Pembroke Pines. We work on gates – only gates.
Pricing reflects the Pembroke Pines market as of 2026. Tidewater Gate Repair offers free estimates – call (877) 748-7198.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Rafael Reyes"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Shanice Carter"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Kelly Gallagher